Skip to main content

Copper and Enamel Earrings


I really love the mix of copper and enamel in jewellery - the colour of the oxidized copper really makes the enamels jump. So continuing my "thing" about circles (it's been going on since I was a child!) I made enamelled discs in various colours and combined them with paddle-shaped copper "sticks."


 I haven't mastered the art of riveting enamelled pieces yet - it IS possible, I've seen other people do it but when I tried the enamel discs cracked. Another option would be to pin the enamelled discs by balling up silver wire on either side. I tried that too and only managed to ruin the enamelled piece. It did stick to the metal I wanted to attach it to but only because the enamel had refired and it would have cracked and fallen off eventually. 



So I stuck to wire wrapping the enamel disc to the metal - less risk of breaking anything!


I made these copper hoops a while ago and left them sitting on my work table until I decided what they would become. They became (......eventually) these wire wrapped hoops with three enamelled discs in turquoise, purple and mint wrapped onto the bottom so they can dangle in a shiny, happy, enamel way :D




Comments

  1. Love the colour of the oxidized copper too!Nice earrings!
    Greetings from Greece!
    ❁Anna
    Snapshotjewellery

    ReplyDelete
  2. They are all beautiful Lesley. i love reading your blog and seeing your creations.

    ReplyDelete
  3. Mi piacciono tantissimo le cose che fai... e queste in modo particolare! Posso chiederti quali smalti usi con il rame? Io ho usato quelli che in Italia si usano con la ceramica Raku, ma non vanno bene. Mi puoi dire dove li acquisti?
    Complimenti!!!

    ReplyDelete
  4. Thanks for your comments!

    Monica - I translated yours too :D I use Thompson enamel powders which you can buy from the Thompson website or from a Thompson supplier in Denmark at enamelsupplies.com

    ReplyDelete
  5. Lovely colours of enamels, I have not done any enameling for ages, I still have loads of thompson enamels left, I bought mine from a seller on etsy, barbara lewis. At painting with fire.

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco