Skip to main content

Copper Bangles - Noisy But Nice


I made my first copper bangle at college night class a few months ago as I had some thick gauge copper wire and I wasn't sure what to make so thought a bangle sounded like a good idea. Here's my first attempt...


I soldered the coils on at home but before I did that I made a nice lot of noise at college hammering the bangle to give it some texture. Hammering's fine, it's just the noise it makes when you hammer a bangle on a metal bracelet mandrel! I didn't make anymore at college as I thought the hammering noise was probably annoying the others in the class......

I did carry on making more at home though once I'd got my own bracelet mandrel. The ringing noise created by the hammering on the mandrel really grates, drives my cats a bit mad and I'm still waiting for my neighbour to ask if I'm running some sort of foundry or something. I tried putting a sock over the mandrel with the bangle on top of the sock but it didn't make any difference and I just ended up with a sock with quite a few interesting holes. I shall persevere though and maybe wear earplugs as the bangles are proving popular.

My latest bangles are decorated with soldered shapes - leaves and ovals that I made from some textured and etched copper sheet.


They were fun to make once I figured the best way to solder the two shapes onto them. I've since bought some steel binding wire which I hope will make life easier the next time I make them. Getting everything in position and keeping it there when I was soldering them had me slightly frustrated shall we say! My third hand isn't the sturdiest and kept moving when I needed it to stay in position and hold the bangle vertically on top of the leaf/oval shapes. Hopefully using the binding wire will mean I can solder the two (maybe three?) shapes on at the same time instead of having to do them one at a time.


I'm planning on adding sterling silver shapes to the next lot of bangles I make. I checked with the London assay office and cleared up a subject I was confused about recently. I had been lead to believe by another jewellery maker a few years ago that any amount of sterling/fine silver on a mixed metal piece that weighed over 7.78g in total would mean the piece needed to be hallmarked. I did wonder about this as sometimes the amount of silver may be so small it would be impossible to hallmark it. I checked and the answer came back that on mixed metal pieces if the silver content is over 7.78g then it would need to be hallmarked, if the silver content is under 7.78g it doesn't. Which makes perfect sense and makes my life a lot easier.
So mixed metal bangles here I come! Soon.

Comments

  1. These are fantastic! I love the textured shapes you added. Hammering metal is so great for destressing!

    ReplyDelete
  2. OK I seriously love those bangles, and I don't even like or wear bracelets. And I can totally relate to the *slightly* irritating noise of a metal mandrel lol! My neighbors DO think I'm running a foundry! Thanks for the eye candy. x

    ReplyDelete
  3. ♥ the bangles! They look great! Must be frustrating to have to send things in to be hallmarked? We don't have to do that here.

    ReplyDelete
  4. Thanks for your comments!
    Yes we do have the hallmarking thing in the UK. Life for jewellery makers would be easier if we didn't!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco