Skip to main content

Craft Storage - It's A Beautiful Thing


I recently decided to revamp the storage boxes I keep my small jewellery making tools and supplies in. If you are anything like me and struggle to make jewellery in a room that is meant for other uses - the dining room and kitchen in other words - instead of having one of those wonderful workrooms/studios/sheds where you can spread things out, you probably get how important having enough storage space is. The dining room table was only used rarely anyway before I started taking over and now isn't used to eat off at all, just for cats to sit on and things to get dumped on to be put away "later".

This is what I had previously...... 


Perfectly good reinforced cardboard drawers but they were starting to get a bit tatty and they just weren't big enough! As you can see I have stuff everywhere, little bits of stuff and big bits of stuff that does start to get untidy and annoying after a while. Bear in mind the photo was taken when I'd tidied up and not when I was in the middle of making something. Then it would be a mass of tools, sand paper, files and bits of metal and metal dust everywhere!
I can't just spread out as it's a through room to the kitchen so I don't have a door to shut and hide the mess from people. I've already aquired one of the kitchen cupboards for my soldering and enamelling tools and supplies plus a cupboard in the sideboard for "stuff" so I definitely needed to sort my worktable space and invest in more nice drawers :D



I found the wooden six drawer boxes on ebay. They are similar to the Ikea drawers but better quality as they are 100% wood and not part hardboard. I also bought a different shaped six drawer Ikea box also on ebay.
After a quick sand I got my beloved stamps and Stayz On ink out and decorated the drawers.


The boxes were then stained and oiled with Danish Oil. I could've left them plain pine I suppose but I think they look so much better and more expensive when they are stained.


I did manage to mess up one of the stamps........... bottom row 2nd from the right....................

And here is the end result, everything moved over to the new boxes but I do still need to do a bit more sorting out. The brown three drawer thing on top that is full of cabs and bezel wire will be moved eventually and I rediscovered all those "useful" bits of metal and wire you keep, some of them from three years ago, that I didn't want to throw away but didn't know what to do with at the time and shoved into a drawer/bag/little pot that I now wonder what on earth I was thinking and know exactly what to do with. Throw gleefully into the bin.


Oh my God look at all those beautiful drawers I can put stuff in.
I need to stop pretending to be an artist and get rid of the paintbrushes though.................

Comments

  1. Very impressed at your handiwork - I initially though those drawers were some pricy antique set! Love how you've customised them :)

    I've not got a dedicated workspace although sometimes I leave things set up until someone else complains...to have a workshop is a dream...

    But thanks for showing how simple it can be to make a work space look really good and presentable to anyone :)

    ReplyDelete
  2. I love how you've decorated the new drawers. Makes me want to get some and do the same thing! Can never have enough storage :)

    ReplyDelete
  3. Thanks for your comments!
    It's amazing how some wood stain can change the appearance of plain pine. I'm about to revamp a very orange pine mirror frame and a coat rack with the stain and possibly some stamping........... I can't stop myself now :D

    ReplyDelete
  4. Nice job! The drawers look beautiful and not something you need to hide from guests. :) Proper storage makes things much easier since you can organize better. Enjoy your revamped space!

    ReplyDelete

Post a Comment

Your comments and questions are very welcome!
If you would prefer to contact me directly please use the contact form on my "get in touch" page.

Popular posts from this blog

Combining Soldering And Enamel

The need to make cute, brightly coloured enamel studs propelled me into the world of combining soldering with enamel a couple of years ago. I knew from reading up on it that it was possible to enamel and solder on the same piece but wasn't too confident I was able to do it back then. It was a slightly embarrassing occurance that made me just get on with - I'd made some enamel studs with glued on stud posts. I'd used 2 part epoxy resin which was a job in itself as it set hard after 5 minutes so I had to keep mixing more up. The finished studs looked ok but that little voice in my head kept asking "are you sure you want to use glue?" I wasn't but didn't think I had any other way to do it so I used glue. I sold my first pair and merrily sent them on their way to Canada. A couple of week later the buyer got in touch to say the stud post had come off one of the earrings and the other was hanging off. I was mortified, apologized profusely and refunded her m

Etching Silver Using Nail Art Stamps

So my love/hate relationship with etching sterling silver continues. I've tried a few times now and always end up with different results most of them not that great to be honest. I've tried connecting the silver and a piece of copper to a 9v battery and also heating the ferric nitrate. Sometimes the results are good sometimes not so good. I currently have an etched piece of silver sheet waiting to be reticulated and rid it of the mess that is the etched "pattern".  I now know that using stamps and Stayz On ink just doesn't work with silver - the time needed to etch using ferric nitrate is much longer than etching copper and the ink starts to wear away after about an hour. This results in the pattern being patchy as the resist is eaten away and the silver ends up quite lumpy and course looking. I have yet to try using pnp paper. I don't know why but it all seems a bit of a faff to do. I don't have a laser printer so would need to find somewhere or

Embossing Metal With My Sizzix Bigshot

I must admit up until a few weeks ago I was vaguely familiar with the name Sizzix but as to what you actually did with a "Sizzix" I was completely in the dark! That was until I stumbled across a video from Vintaj showing how you could use their embossing folders with a Bigshot to create designs on metal ("metal" - my favourite word after chocolate!) I was really impressed and itching to have a go, I just needed a Bigshot........ I waited a few weeks then when the urge to possess one overcame me I went out debit card at the ready..............and the shop had sold out! So I trundled off to The Range on the off chance and came home clutching my own surprisingly heavy pink and black wonder machine. It sat on the dining room table for a couple of days while I waited for the embossing folders I'd ordered online to arrive then the time came to start playing! I started with some pre-cut 24g copper hearts and the Wildflower Vines and the Butterfly Swirls Deco